Basic Info.
After-sales Service
1 Year
Temperature Range Gege
-70~160 Celsius Degree
Compressor
French Tecumseh
Temperature Fluctuation
±0.5ºC
Temperature Deviation
±2.0ºC
Humidity Deviation
±3.0%Rh(>75%Rh)
Heating Rate
Heating:2~3/Min
Cooling Rate
Cooling:0.7~1.5/Min
Controller
7 Inch LCD Colorful Touch Screen
Transport Package
Wooden Box
Product Description
Programmable temperature and humidity chamber
Equipment use:This series of products are widely used in aviation, aerospace, electronic and electrical products, instruments, materials, parts, equipment, etc. to do accelerated damp heat test, alternating damp heat test, constant damp heat test, can also be used for high and low temperature routine test, cold test, low temperature storage, in order to test the performance of the proposed environmental conditions and behavior to make analysis and evaluation.Meet the standard.GB/T2423.1-2008 low-temperature test methodGB/T2423.2-2008 High temperature test methodGB/T2423.3-2008 Damp heat test methodGB/T2423.4-2008 test method for alternating heat and humidityGB/T2423.22-2002 temperature change test methodGJB150.3 Military equipment environmental test methods: high temperature testGJB150.4 military equipment environmental test methods: low temperature testGJB150.9 military equipment environmental test methods: damp heat testProduct parameters:| Model | ECT 225L |
| Volume | 225L |
| Temp. Range | -70ºC~+160ºC ( A:0ºC B:-20ºC C:-40ºC D:-60ºC E:-70ºC) |
| Humidity Range | 20~98%RH/(20~70)ºC (The lowest humidity can reach5%R.H.) |
| Temp. Fluctuation | ±0.5ºC |
| Temp. Deviation | ±2.0ºC |
| Humidity Deviation | ±3.0%RH(>75%RH) |
| Heating and cooling rate | ↑Heating:2~3/min ;↓Cooling:0.7~1.5/min |
| Inner size (mm) | 700*700*500 |
| Ambient Temperature | +5~+35ºC |
| Materials | Outer | Cold rolled steel + Surface spray treatment |
| Inner | Stainless Steel Plate(SUS304) |
| Isolation | Rigid polyurethane Foam + glass fiber wool |
| Adjusted | Heater | Nickel chromium alloy heating wire heater |
| Humidifier | Stainless steel electrical heating (humidification mode) |
| Fan | Large air volume centrifugal fan |
| Compressor | France "Tecumseh",German "Bitzer" or "Blog", America"Gulun" |
| Refrigerant | R404A/R23 |
| Controller | Screen | 7 Inch LCD Colorful Touch Screen Controller |
| Operation Mode | Program Setting,Fix Value Control |
| Setting Mode | Chinese / English Menu, Touch Input |
| Program Capacity | Editable: 100 programs, each program has a maximum of 100 steps and 999 segments; The program can be connected. |
| Input | PT100 Platinum Resistors |
| Communication | Local and remote communication functions; USB data output |
| Curve Recording | It can save historical data and curves of equipment operation |
| Attached Function | Fault alarm and causes; Fault record; Over temperature
protection;Upper and lower temperature protection; Power off
protection; Alarm output; Timing function |
| Power Supply | AC220V 50 Hz / AC380 50Hz Three phase four wire+ protective earth wire |
Standard Configuration
| Multi-layer anti fogging glass window |
| Test hole(Φ50mm) |
| Indicator light,Box light |
| Compartment shelf |
| Safety Configuration | Compressor over-pressure protection. |
| Compressor motor overheat protection |
| Compressor over-current protection |
| Cooling water supply under-voltage protection |
| Over temperature protection |
| fan motor overheat protection |
| Main power phase sequence and phase loss protection |
| leakage protection, load short circuit protection |
Address:
No. 31, Dongbei Road, Dongqiao Industrial Zone, Haishu District, Ningbo, Zhejiang, China
Business Type:
Manufacturer/Factory
Business Range:
Apparel & Accessories, Auto, Motorcycle Parts & Accessories, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Manufacturing & Processing Machinery, Security & Protection, Tools & Hardware
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
