Basic Info.
After-sales Service
24 Hours on Line Services
Max Diameter of Workpiece
1000mm
Mass Scope of Workpiece
<900kg
Type
Environmental Test Equipment
Transport Package
Wooden Box
Product Description
Rapid temperature change test chamber
Equipment usage:Rapid temperature change test chamber is widely used in aviation, aerospace, electronic and electrical products, instruments, materials, equipment, etc. to do rapid temperature change test and stress screening test, it can also do accelerated damp heat test, alternating damp heat test, constant damp heat test and high and low temperature routine test, cold test, low temperature storage etc, in order to make objective analysis and evaluation of the performance and behavior under the proposed environmental conditions in the test.Standard compliance:MIL-STD-2164, GJB-1032-90 electronic product stress screening
MIL-344A-4-16 Environmental stress screening for electronic equipment
MIL-2164A-19 electronic equipment environmental stress screening method
GJB/Z34-5.1.6 Quantitative environmental stress screening guide for electronic products
NABMAT-9492 U.S. Navy Manufacturing ScreeningProduct parameters:| Model | ESS-100L | ESS-225L | ESS-480L | ESS-640L | ESS-1000L |
| Volume (L) | 105L | 225L | 480L | 640L | 1000L |
| Temp. Range | A:-20~+100ºC B:-40~+100ºC C:-55~+100ºC |
| Temp. Fluctuation | ±0.5ºC |
| Temp. Deviation | ±2.0ºC |
| Humidity range | 20~98%RH.(optional) |
| Humidity Deviation | ±3.0%RH(>75%RH) |
| Temp. Change Rate | 5ºC/10ºC/15ºC/20ºC/min (Linear and non-linear confirmation upon ordering) |
| Internal Dimension W*D*H (mm) | 500*420*500 | 600*500*750 | 800*800*750 | 800*800*1000 | 1000*1000*1000 |
| External Dimension W*D*H (mm) | 750*1450*1650 | 850*1665*1795 | 850*1850*1795 | 1050*1980*2050 | 1250*1980*2050 |
| Operating Ambient Temp. | +5~+35ºC |
| External Material | Cold rolled steel + Surface spray treatment |
| Internal Material | SUS304 Stainless Steel Plate |
| Thermal Isolation | Rigid polyurethane Foam + glass fiber wool |
| Heater | Nickel chromium alloy heating wire heater |
| Humidifier | Stainless steel electrical heating (humidification mode) |
| Fan | Large air volume centrifugal fan |
| Compressor | France "Tecumseh",German "Bitzer" or "Blog", America"Gulun" |
| Refrigerant | R404a/ R23/ R508b |
Control System | Screen | 7 Inch LCD Colorful Touch Screen Controller |
| Operation Mode | Program Setting,Fix Value Control |
| Setting Mode | Chinese / English Menu, Touch Input |
| Program Capacity | Editable: 100 programs, each program has a maximum of 100 steps and 999 segments; The program can be connected. |
| Input | Thermocouple |
| Communication | Local and remote communication functions; USB data output |
| Curve Recording | It can save historical data and curves of equipment operation |
| Attached Function | Fault alarm and causes; Fault record; Over temperature protection;Upper and lower temperature protection; Power off protection; Alarm output; Timing function |
| Power Supply | AC220V 50 Hz / AC380 50Hz Three phase four wire+ protective earth wire |
| Standard Configuration | Multi-layer anti fogging glass window |
| Test hole(Φ50mm) |
| Indicator light,Box light |
| Compartment shelf |
| Safety Configuration | Refrigeration system: compressor over-pressure protection, compressor motor overheat protection, compressor over-current protection, cooling water supply under-voltage protection. |
| Test chamber: over temperature protection, fan motor overheat protection |
| Others: main power phase sequence and phase loss protection, leakage protection, load short circuit protection |
Attention
| 1. All terms of temperature change rate are the average change rate of air in the whole process, not the product temperature change rate;
2. The temperature change rate will vary according to the specimen load, specimen material structure and temperature range; 3. Cooling water temperature (ensuring cooling performance): 10 ~ 28 ºC, water pressure 0.1~ 0.3MPa.
4. 5. All information is for reference only, subject to actual technical solutions
|
Address:
No. 31, Dongbei Road, Dongqiao Industrial Zone, Haishu District, Ningbo, Zhejiang, China
Business Type:
Manufacturer/Factory
Business Range:
Apparel & Accessories, Auto, Motorcycle Parts & Accessories, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Manufacturing & Processing Machinery, Security & Protection, Tools & Hardware
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
